Support carrier for reinforced concrete supports SV-105, SNV-7-13, SV105-3.5, SV105-5.0

Feedback
Description

The equipment of the STANISLAV-704-4R-MPO2 support carrier is multifunctional:

  • the function of setting the support together with the base at a height ranging from -260 mm to + 660 mm. from the horizon, and also allows you to install the support vertically when the tractor itself is on the rise or fall.
  • the function of grabbing the support from the ground, including above or below the horizon.
  • the function of placing the support in the base and transporting the support and the base, both assembled and separately.
  • provides for work with a footrest installed at different heights and at different slopes of the tractor itself (the design of the STANISLAV-704-4R-MPO2 support carrier based on the STANISLAV-704-4R-MPO2 tractor was developed taking into account the requirements and wishes of representatives various GOKs). Equipment "STANISLAV-704-4R-MPO2" allows you to separately capture the support and install it in the footrest, regardless of whether the shape is trapezoid or parallelepiped.
  • in the design of the basic STANISLAV-704-4P tractor, the lateral misalignment is carried out due to the balance beam of the sub-motor bridge. In this case, the entire weight of the tractor, with the exception of the weight of the under-motor (front) axle and front wheels, prevents the support from tipping over. With this design, the rollover resistance is several times higher.
  • has increased visibility due to the size of the hood, which allows you to use bulldozer equipment more efficiently as a full-fledged bulldozer.

The plant guarantees prompt delivery of the required amount of tractor machinery and equipment. All tractors are covered by an official warranty.

Specifications

Travel speed max, km / h

48.0

Operating weight, no more, kg

20,000.00

Tractor dimensions, no more, mm

9,500 x 3,200 x 3,500

Cab

Cab with classic center layout, two-seater with panoramic (spherical) glazing with protective structure (roll cage) protecting the operator from rollover of the machine (ROPS) and from falling objects (FOPS), heater, increased visibility, car radio ...
Side cab (with a low clearance under power lines (up to 4.1 m with a support length of up to 13 meters), two-seater, with a protective structure (safety cage) that protects the operator when the machine rolls over (ROPS) and from falling objects (FOPS), heater, increased visibility, radio.

Frame

Articulated without a horizontal hinge tube with the installation of ball bearings in the lugs of the connection to the semi-frames, ensuring the tractor rotation by folding the semi-frames about the vertical axis. Lateral misalignment is ensured by installing a balanced sub-motor bridge. The sub-engine and cargo semi-frames are reinforced-strength welded sheet structures.

Bonnet

Metallic

Engine

YAMZ-238M2 / YAMZ-238D

Motor rated power,

kW (hp)

176 (240) / 243 (330)

Electric pre-heater for engine (220V)

Installed

Reverse horn

Installed

Engine cooling radiator

6 row 238

Gearbox

Semi-automatic, quick reversing, dual-mode with an installed torque converter.
Total number of gears: forward - 4, backward - 4.
Shifting gears and reverse hydromechanical using friction clutches, separate, allowing to change the direction of movement without switching off the transmission.
Mode switching is mechanical.

Axles with automatic cross-axle differential locks (No-Spin)

Balanced front axle - PMZ.16.02.00.000 with automatic cross-axle differential lock (No-Spin).
Rear axle - model PMZ.16.01.00.000 with automatic blocking of interwheel differential (No-Spin).
Main transmission type - spiral-toothed bevel;
Final drive type - spur gear;

Steering

Based on hydraulic steering and priority valve

Fuel tank volume, l

700.0

Tires

29.5 / 75 R25

Coloring (optional)

Color orange / yellow / corporate

Braking system

Air-hydraulic, disc brakes, 4 brake calipers on the axle.

Air system

Air cleaner with ejection system.

Hydraulic equipment

P-160L priority valve

Installed

Hydraulic steering wheel E-1000R

Installed

Hydraulic pump from 50 cm3?

2 pcs. installed

Swing cylinder

2 pcs. installed

Hydraulic distributor of MPO2 equipment

5-section is installed.

Electrical equipment

Voltage, V

24

Batteries

2 12V 190 / h

Attachments

Hydraulic equipment MPO-2 for transportation of reinforced concrete supports models SV-105, SNV-7-13, SV105-3.5, SV105-5.0, etc.

Hydraulic equipment for lifting and transporting power transmission line supports.
Carrying capacity - 2 tons.
Gripping the power transmission line support from the ground or a pile using slings.
Availability of a device for fixing the power transmission line support

Power transmission line support fixation device

Installed

Optional extras

Hydraulic dozer equipment on a sub-motor frame

Control - hydraulic
Blade dimensions:
Width: 3 200 mm
Height: 1 100 mm
Max. lifting height 800 mm
Blade installation angle in grader position 26?
Skew angle + 11?

Hydraulic bulldozer equipment for road construction and maintenance, model DM-15

- width - 4200 mm. - height - 1070 mm. - lifting height - 800 mm. - the depth of lowering the blade into the bulldozer position, not less than 250 mm. - angle of installation in grader position 25 - angle of skew 45 ... -5

Hydraulic wedge-shaped dozer equipment "Aurora"

- width - 3150 mm. - height - 1100 mm. - lifting height - 700 mm. - blade lowering depth - 250 mm.

Landmaster Multifunctional Variable Geometry Dozer

- width - 3450 mm. - height - 1100 mm. - blade lifting height - 800 mm. - the depth of lowering the blade to the bulldozer position - 450 mm. - angle of installation in grader position 30 - angle of installation in wedge-shaped position 30 - angle of installation in dovetail position 30 - skew angle + 11

Additional options

Air conditioner
Autonomous cab heater Webasto AT 2000
Autonomous engine heater Webasto ST 90
PZhD-30 engine preheater
Double glazed cab
RVD in arctic performance
Insulation of the engine compartment
Separ 2000 Heated Fuel Filter

Copyright 2020 PETERSBURG MACHINE BUILDING PLANT
Development of